Home | About us | Products | Contact us | Email | Feedback
 


ONE OF THE LEADING MANUFACTURERS OF ALL KIND OF
WELDING MACHINES FROM INDIA LIKE TIG/MIG WELDING
MACHINES, WELDING RECITIFIERS AND PLASMA CUTTING MACHINES...

 
   
AIR PLASMA WELDING MACHINE

      
  Compressed Air is heated up and coverted into molecular state and on Further heating the Air is ionised. the ionic state of any gas is called Plasma. We use Air as media , hence its called Air Plasma.

* No more oxy / fuel for cutting all ferrous and non ferrous metal
* Double the speed at half the cost.
* No heat effect zone, no distortaton.
* No cumbersome fuel ignition, preheat flame adjustment, preheat Time or oxygen adjustment required.

  
       
  Technical Specfications

   
MODEL NO.DETAILS
MPT-6
MPT-10
MPT-16
MPT-30
MPT-40
MPT-50
PRIMARY VOLTAGE
380-440V 3Phase 50 Hz
380-440V 3Phase 50 Hz
380-440V 3Phase 50 Hz
380-440V 3Phase 50 Hz
380-440V 3Phase 50 Hz
380-440V 3Phase 50 Hz
SECONDARY VOLTAGE
260-280V
260-280V
260-280V
260-280V
260-280V
260-280V
LINE CURRENT
12 Amp.
24 Amp.
35 Amp.
 50 Amp.
68 Amp.
80 Amp.
ARC CURRENT
40 Amp.
60 Amp.
80 Amp.
100 Amp.
150 Amp.
170 Amp.
O.C.V. (NO LOAD)
300-320VDC
300-320VDC
300-320VDC
300-320VDC
300-320VDC
300-320VDC
POWER RATING
6.8 KW
13.5 KW
20 KW
28.5 KW
38.5 KW
45.5 KW
INSULATION
F CLASS
F CLASS
F CLASS
F CLASS
F CLASS
F CLASS
DUTY CYCLE
100% AT FULL LOAD CURRENT OF 40AMP.
100% AT FULL LOAD CURRENT OF 60AMP.
100% AT FULL LOAD CURRENT OF 80AMP.
100% AT FULL LOAD CURRENT OF 100 AMP.
100% AT FULL LOAD CURRENT OF 150 AMP.
100% AT FULL LOAD CURRENT OF 170 AMP.
Cutting Capacity
FOR SS CLEAN CUT



6 mm



15 mm



20 mm



35 mm



45 mm



60 mm
FOR SS PARTING CUT 10 mm 20 mm 30 mm 45 mm 55 mm 70 mm
For Machine Model MPT30, 40, and 50 , Two stop Current Settings are Available at Extra Cost....